PRODUCTS     >     alarm-system     >     ness-alarm-system

D8x-D16x

  • 8 or 16 Zones + Tamper (D8x/D16x)
  • Onboard 3 Door Access Controller
  • Auto-Time Control via onboard Real-Time Clock
  • Optional Radio Interface for integrated wireless security
  • Onboard Vibration Sensor Analyser
  • Multiple programmable EOL resistor values from 0k to 22k
  • 4 programmable auxiliary outputs
  • Direct Connect or Dial-up programming via NessComms™
  • Contact ID and VOICE reporting dialler
  • Remote control of outputs via telephone
  • Up to 56 User Codes (PIN, RADIO KEY or PR OX CARD)

Navigator

  • 8 or 16 alarm zones.
  • Supports up to 3 Navigator Touch keypads.
  • 56 user codes can be programmed to operate by keypad PIN, Radio Key or Access Card.
  • Optional Ness Radio Interface for fully integrated wireless security. The D8x and D16x support up to 55 Radio Keys and up to 8 (D8x) or up to 16 (D16x) Ness radio devices such as radio PIRs, radio reed switches or other Ness radio devices.
  • Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
  • Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
  • 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
  • Home Monitor Mode allows partial arming, (eg, perimeter security overnight).
  • Day Mode feature allows daytime monitoring of fire doors, coolrooms and other doors without the need for full arming.
  • Temporary Day Zone feature allows easy enabling/disabling of Day Mode by the user.
  • Keypad Panic and Duress facilities.
  • Two button arming option for quick and easy arming.
  • F ire Alarm option with different siren tones.
  • Highly flexible zone to output mapping.
  • Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
  • Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
  • Siren chirp and strobe flash on arming with radio key.
  • Quiet chirps option on arm/disarm by radio key.
  • True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
  • 4 programmable auxiliary outputs.
  • Enhanced serial data input/output via RS232 for interfacing to third party controllers.
  • Automatic reset fuses protect all outputs.
  • Programmable Reset Output lockout.
  • 30 event memory from keypad. 80 event memory can be accessed using NessComms™.
  • Standard defaults to suit most applications for faster installation.
  • Easy programming by keypad or NessComms™ software.
  • All programming data is permanently stored in a non-volatile memory.
  • All inputs and outputs are heavily protected against lightning and high voltage supply transients.
  • Optional output expander provides systems and zone outputs.